Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

Z Axis Does Not Move

Q: Why the GSK 928TEa could not move the Z axis? The coordinate of Z axis had changed on CNC system, but actually the Z axis is not moving.

 

A: The Z axis might not receiving the signal from the CNC control, or there is signal but the driver is not enable.

 

GSK928TEa Specification:

http://www.cncmakers.com/cnc/controllers/CNC_Controllers_for_Lathes/GSK928TEa.html


—[Close]— —[ Back]— —[ Print]—