Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

Tuning the servos with a oscilloscope

 

Servo User:

Had a question about tuning the servos with a oscilloscope.

Does your drive have the ability to connect to a analog position and current waveform connection for an oscilloscope to read?

 

CNCmakers Support:

Yes, you can do that.


—[Close]— —[ Back]— —[ Print]—