Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

Tool Post(turret) sometimes does not move

Tool Post(turret) sometimes does not move

 

Causes:

1-      The control signal of the tool post was interfered.

Solution: Make sure the CNC controller and the spindle inverter are grounding well, and connect the anti-interfere capacitance.

 (From http://www.CNCmakers.com)

2-      Sometimes the tool post or turret has internal mechanical problem which caused the tool post not move.

Solution: Repair the tool post and adjust the mechanical parts.


—[Close]— —[ Back]— —[ Print]—