User:

I would get when the spindle turns one full revolution, corresponding to 360 degrees.

1 turn = 360 degrees.

That parameter should change?

Gsk 980tdc controller

Gs3000 spindle driver motor

CNCmakers Support:

When the system shows 3 digits after the decimal point, for example: 90.000

And the encoder is 1024 lines

Please set PA29=64 PA30=5625

When the system shows 2 digits after the decimal point, for example: 90.00

And the encoder is 1024 lines

Please set PA29=640 PA30=5625