Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

Put magazine at Zero position failed


My machine is 8 tool magazine, and the CNC system is GSK218MC-H, I have been trying changing K parameters, I have gotten to move in and out magazine, but at time of put magazine at Zero position is not posible.


CNCmakers Support:
Please check K10 to turn on zero return function and select the corresponding switch type.

—[Close]— —[ Back]— —[ Print]—