Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

PC can't receive data from CNC



The data can be sent from PC to GSK928TEII CNC controller via the communication software by RS232, but the PC cannot receive data from the GSK928TEII (The CNC shows the sending is completed, but on PC shows only two blocks then stop)


CNCmakers Support:

It could be the cable is too long, you can try shorter cable.

—[Close]— —[ Back]— —[ Print]—