Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

Modify Macro for Tool Magazine


User: We want to modify the macro for the tool,it is Controller 218 MC-H.
We want to know your password, we wait for answers, thanks.

CNCmakers Support: Please turn on the parameter switch, then go to the No. 27 digit parameter.

If you need to edit the 90000 macro, you can change NE9 to 0.

If you need to edit the 80000 macro, you can change NE8 to 0.

Note: after you change the macro, you must change back the NE9 and NE8 as before, or the macro will lost.

—[Close]— —[ Back]— —[ Print]—