Mitsubishi Lathe MTC-10 Owner:

Hi, we are looking CNC retrofit set for Mitsubishi lathe MTC-10

X, Y axes

spindle motor

hydraulic turret for 12 tool

miscellaneous functions for coolant control and flush control, chip conveyor, door control, work light, jogging, foot control for chuck, unchuck, tailstock positioning, tailstock advance, tailstock return, homing axes.

 this is the information of motors

SPINDLE MOTOR

MITSUBISHI AC SERVO  MOTOR

Type SJ 15A

RPM 1500,4500, 6000

Continuous kW 11

Volts 200

Amps 79

Frame  B132F

X axis MOTOR

MITSUBISHI AC SERVO MOTOR

Type hHA100 NCB-S

Permanent magnetic field

RPM 2000

FREQ 66.7 Hz

Volts 170

Amps 42

Trq 42 Nm

Output 2.0 kw cont

Z axis MOTOR

MITSUBISHI AC SERVO MOTOR

Type HA200 NCB-S

Permanent magnetic field

RPM 2000

FREQ 66.7 Hz

Volts 170

Amps 57

Trq 60Nm

Output 3.5 kw cont

CNCmakers Support:

Thanks for the information,

Following you may find the CNC Retrofit Package for Mitsubishi lathe MTC-10:

Turning machine CNC controller C1000T   1 set

(CNC controller for turning machine 2 axes simultaneously and 1 servo spindle)

AC Servo Unit for X axis 22NM  1 set

(Servo Motor+driver+cables+connectors, 3.5KW,22Nm,1500rpm,17.5A,175mm support)

AC Servo Unit for Z axis  30NM 1 set

(Servo Motor+driver+cables+connectors, 4.7kW,30Nm,1500rpm,24A,175mm support)

AC Servo Spindle Unit 15KW  1 set

(Servo Spindle Motor+driver+cables+connectors , 15KW, max. 7000rpm)

All Cables(6 meters), Software & Manuals  1set