Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

Making Bearing Bracket by VMC640LH with GSK25i CNC

 

 
The use of Xinnuo VMC640LH and GSK25i CNC system improves the machining surface of the parts, the machining efficiency is low, and the phenomenon of tool wear is prone to occur.
 
solution
Optimization of tooling fixtures;
Optimization of processing technology;
Adopting trochoidal milling, combined with the high-speed and high-precision functions of the GSK system, that is, the high-speed machining method with small cutting width and large cutting depth improves processing efficiency, processing quality, and reduces tool wear;
The tooling and finishing of parts are optimized to avoid the interference of flying cutters, to better improve the surface finish of parts, and to effectively improve the wear of end mills.
 
 
 
 
 
 
 
 
Application effect
Improve the efficiency of optimized processing technology by 50%;
Reduced and reduced tool wear;
The finished surface finish has been significantly improved.
 

 


—[Close]— —[ Back]— —[ Print]—