Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

Machining error 0.01mm for each 1mm feeding


GSK980TDb CNC Lathe Controller User:

Good afternoon sir, our SMTCL lathe has GSK980TDb CNC system, the ball screw of X axis is 20*4, there is machining error 0.01mm for each 1mm feeding, this means the CNC system command is 10mm, but actually it moves only 9.9mm. We checked  it is not ball screw problem, how should we do with it?


CNCmakers Support:

You can modify the electric gear ratio, adding 1/100 based on original value.

—[Close]— —[ Back]— —[ Print]—