Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

M10 M11 command

 Q: I have a lathe machine with GSK 928TE CNC system, it has pneumatic clamp function, but I could not use M10 and M11 to function it, only the manual mode works, what can I do?

A: You need to add a 24V relay, and the outputs of M10 and M11 comes out from No.18 pin of X7 port which behind the GSK928TE CNC system.


—[Close]— —[ Back]— —[ Print]—