Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

Is the Z axis locked?


CNC User:

The Z axis position on CNC screen is changing,  but actually the machine Z axis is not moving, is the Z axis locked?


CNCmakers Support:

The axis could not be locked.

In this case should be driver not ready, or wiring has problem, meanwhile the driver alarm must be shielded, so the position is changing while the actual Z axis is not moving.

—[Close]— —[ Back]— —[ Print]—