Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

Illegal CNC Macro Program


GSK980TDb User:

We run below Macro program on GSK980TDb lathe CNC controller, and it works ok.

WHILE...DO1 G01X100 ... END1


Then change the macro program to below, it alarms:  G01X[100+#1] is illegal.

WHILE...DO1 G01X[100+#1] ... END1


What's wrong of the macro program?


CNCmakers Support:

Yes, G01X[100+#1] is illegal, because calculation is not supported for the macros of GSK980TDb.

—[Close]— —[ Back]— —[ Print]—