Workpieces are clamped to complete grinding at one time;

According to the customer's drawing requirements, write a process program to process the gradual change section first (to save processing time), and then process the total length processing, divided into rough grinding and fine grinding, and the batch consistency is better;

With automatic grinding wheel and automatic compensation function;

Menu interface input;

After power off or other operations when the workpiece is half processed, run the program again to follow the last processed position (or the previous position);

The system has a torque feedback alarm function.

 

 

 

 

 

 

solution

 

Configure user-defined picture parameter interface picture parameter input;

The center frame is used to grind long workpieces to reduce vibration and deformation;

Using CNC three-axis grinding wheel feed axis (X axis) and workpiece rotation axis (C axis), length axis (Z axis) interpolation linkage, to achieve the gradual processing of screw diameter;

The macro variable value is used to memorize the processing position, and the variable value is recalled the next time the program is executed.

 

 

Processing effect

 

Menu-type interface is easy to input (only need to enter the drawing size in the figure parameter interface)

Through segment grinding, the screw processing efficiency can be improved

One clamp and one top is used for clamping, and it is stable without shaking when the workpiece is transmitted with large torque