Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

HOLD+ HOLD- Connction

What are these two wires:  Red and White that come out of Cable of Z axis for ?

Please see the picture. One end has a label HOLD – and the other HOLD+


CNCmakers Support:
The red and white wires with letter HOLD+ and HOLD-, they are for the brake of the Z axis.
We need to connect these HOLD+ and HOLD- wire to the brake through a small relay, which will protect the driver.
For better understanding, attached you may find connection of the HOLD+ and HOLD- with relay and GSK218MC-H or GSK218MC-V.


—[Close]— —[ Back]— —[ Print]—