Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

GSK 980MDi

 

Customer request

The maximum width of the workpiece is 1200mm, the maximum length is 1200mm, and the processing dimensional accuracy is required to be <0.15mm;
The customer only needs to input the workpiece blank size and processing size in the numerical control system, and the machining can be completed in one clamping;
 
solution
Write custom pages and macros, and the customer can enter the processing parameters to run the program for processing;
Write a material parameter page to set the relevant parameters of roughing and finishing;
Backlash compensation and optimization of servo parameters for the rotating shaft to improve machining accuracy.
 
 
 
Application effect
The customer only needs to input the size of the product and then start the process according to the cycle start, the operation is simple and easy to learn;
One-time clamping can complete the processing of four sides of the workpiece, improving processing efficiency and precision;
Directly modify the cutting amount and cutting speed at the interface to facilitate program debugging and machining.
 
 
 
The tool set measures the blank size and automatically performs roughing and finishing to the required dimensions.
 

—[Close]— —[ Back]— —[ Print]—