Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

GSK 988 T Turning Center CNC System Alarm


We have an machine with GSK 988 T CNC system, the system shows 5145 Absolute encoder data parity error, and then alarms 604 for X axis servo alarm , the driver DAT2075 alarms Err-45 every time while the tool comes to the same position.

CNCmakers Support:
According to your descrition, the problem should not from GSK 988 T or DAT2075,  there must be somewhere poor contact. please kindly check.

—[Close]— —[ Back]— —[ Print]—