Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

GSK983Ma 4 Axis



I have a technical question.

With the GSK983Ma 4axis control, inputs X48.0 , X48.1 , and X48.5 are shown in the manual to be for 5th axis limits switches and decel switch. Are these inputs still "fixed" for the 4axis control or can I use them for other uses?


CNCmakers Support:

Only if you need to use Rigid Taping, you will need to jump out X48.0 COM and X48.1 COM.

And if you want to use Rigid Taping, it is recommended to use Servo spindle.

—[Close]— —[ Back]— —[ Print]—