Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

GSK980TDc could not run G01 in Auto Mode

CNC lathe machine User:
1 Turning CNC Controller 980 TDc
2 AC Servo unit for X axis 175SJT-M150D
3 AC Servo unit for Z axis 175SJT-M220D
4 all cable... etc.
Now I installed already it can moving smoothly by manual and MPG both axis,  but the problems is when run in auto mode cod G01 all of feed rate it moving not smoothly both axis it moving by revolving stop intermittently, please tell me how to solve this problem


CNCmakers Support
Please change parameter No.7 of GSK980TDc turning system to 00000000, and try again.

—[Close]— —[ Back]— —[ Print]—