Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

G54 and G92 conflict

 

CNC Retrofitor with GSK980MDc:

We have just retrofit a milling machine with your GSK980MDc system, once setting workpiece coordiate with G92,  then change to a new program without using G92 but G54 G00 X0 Y0 (the G54 coordinate had been set up), it will position to the reference point of the previous which set up by G92, but not G54, why this happened?

 

CNCmakers Support:

After using G92, each axis must be returned to machine zero point, and then you can use G54.


—[Close]— —[ Back]— —[ Print]—