Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

DA98A Err 7 Alarm



We have a problem on servo drive model DA98A-35A (V3. 10  date 12/2007) , once we enable the servo drive we get err 7 on the screen.


The error is not explained in the DA-98A servo manual.


All the connections are ok, we replaced this drive with another unit of exactly the same type and it’s working without problem


Please inform us what is this error meaning and how to resolve the problem.



CNCmakers Support:

Please change parameter of DA98A-35 PA20=1.

—[Close]— —[ Back]— —[ Print]—