GSK980TDi User:
I just installed a cnc controls that I bought from you but im having this alarm see attach picture.
Please let me know how to reset it, thank you.
CNCmakers Support:
The level 2 password is ******
You can follow the alarm reasons at the bottom of the screen to remove the alarm.
CNC ALM 6608 The slave device's axis name (logic address) is not matched with the system's valid axis.
6608 trouble shooting: under level 2, set the connection device's axis name in
"Set -> GSKLink connection device page. And confirm it.
 |
 |
| Products Catalogue | Home | About Us | Retrofit | Download | News | Tech Support | Contact Us | |
|
|
|
 |
