Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > Tech Support >

6 Station Tool Post Center Height



I have one of your 6 station tool post on my lathe.  We recently had a crash that resulted in preventing the tool post from being able to advance.  As a result I opened the device to free up the jammed parts.  Now the tool position is too low – not cutting on center.

Do you have any instructions regarding how to properly reassemble the tool post for proper function and alignment?


CNCmakers Support:

You can try to put some steel plate under the tool post, so it will increase the center height of the turret.

—[Close]— —[ Back]— —[ Print]—