Products Catalogue Home     |     About Us    |     Retrofit     |     Download     |     News     |     Tech Support     |     Contact Us     |     
ppr fittings-NF-4011-Newsun Industry Co., Ltd
Home > News >

GSK928MA Drilling & Milling CNC System

GSK928MA Drilling & Milling CNC System(Phased out already)

ü English/Chinese Graphics LCD display;
ü 4 controllable Axes: X, Y , Z, axis and additional C axis;
ü 4 Axes linear interpolation, 2 axes arc Interpolation, Z Axis tapping
ü 22 kinds of milling, drilling, tapping cycle dictate;
ü Parameters programming suitable for special purpose;
ü Optional DNC function to finishing complex machining with CAM;
ü Changeable shifting time fitting in with servo or step driver system;
ü Actual adjustable feed speed ratio;
ü Optional electronic hand wheel.

160×128 Lattice LCD
Controllable Axes
4 axesXYZC
Linkage Axes
4 axeslinear/ 2 axesArc
Min Unit
Max travel
Max Move Speed
Actual speed, limited by driver and load, can be set by user with parameters
Max Interpolation Speed
Linear: 4.5m/min
Arc: 3m/min
Feed/Hand Speed Ratio
0150%, 16 grades, really adjustable
Auto Speed-up/down
User can set speed-up/down time and starting speed.
User Programming
Storage: 28KB/100programs, ISO Code, relative/absolute coordinate complex programming, full-screen edit
G Function
49 kinds G Code, incl. 22 kinds machining cycle dictate, parameters programming, read/write 2 points user input/ 3 points user output
User Data Storage
Program, parameters, tool composition and coordinate-holding at power lost
RS232 interface for transmitting user programs & parameters between this system. And PC, Optional DNC communications for complex machining with CAM
Spindle Function
User 4 bits BCD encode spindle step shifting, or 0~10v simulate voltage output inverter to realize spindle stepless change. Spindle assembled the 1200p/r encoder can realize transfer feed and Z-axis metric/inch tapping. 
Tool Compensations
Tool length/radius compensations have 9 groups’ compensation data apiece.
Assistant Functions
All positive/reverse rotation, stop of spindle coolant and lubrication are controlled by hand/program
Hand Function
Continuous hand feed; Single step hand feed( 7 kinds of steps set by user with parameters); Defined coordinate fast move; ×1,×10, 2 steps hand feed ratio with optional electronic handwheel
Operation Mode
Edit, Automation, Hand (JOG), dry run, Communication, Parameters setup.
Overall Dimension




CNC conversion kit:


—[Close]— —[ Back]— —[ Print]—